Service Calibrations CANCEL if you want to cancel the Calibrations Backup. Press Enter once the selection has been made. Top CALIBRATIONS BACKUP Back Electronics Module has been replaced? ↑ ACCEPT ↓ Make Selection CANCEL Enter Press Enter c If you selected to continue, the Calibrations Backup will start to update the calibrations and the following message will be displayed on the front panel: Updating Backup. Please wait d Once the Calibrations Backup has been completed the following message will appear on the front panel: Top Back ↑ ↓ Press Enter Enter If the Tubes System was replaced a If the Tubes System was replaced, then select Tubes System and press Enter .
Top CALIBRATIONS BACKUP Back What have you replaced? ↑ Press Enter Tubes replaced... Electronics Module repl ↓ Make Selection Enter b The following message will appear asking you to confirm the operation. Select ACCEPT if you want to continue the Calibrations Backup, or select 5-20 HP DesignJets 1050C and 1055CM Printers Service Manual Backup completed. Press ENTER to continue