Removal and Installation Left and Right Rear Covers Refer to Figure 22. Removal WARNING Switch off the printer and remove the power cord. NOTE Working from the rear of the Printer. 1. Remove the T-10 Screw (Item 1) that attaches the left hand rear cover (Item 2) to the Printer. 2. Release the left hand rear cover (Item 2) from the retaining clip (item 3) that attaches the ferrite (item 4) to the rear cover. 3. Remove the T-10 Screw (Item 5) that attaches the right hand rear cover (Item 6) to the Printer. 4. Release the right hand rear cover (Item 6) from the retaining clip. 6 5 2 3 1 4 Figure 22: Left and Right Rear Covers 8-24 HP DesignJets 1050C and 1055CM Printers Service Manual