System Error Codes System Error: 010040 Problem Description: Error in Paper-axis Encoder quadrature. Corrective Action: Try the following: n Check that the Paper-Axis Motor cable is NOT broken or damaged. n Check that the Paper-Axis Motor cable is correctly connected. n Replace the Paper-Axis Motor ⇒ Page 8-12 . n If the Error Code continues, replace the Electronics Module ⇒ Page 8-25 . WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: 010041 Problem Description: Error in Scan-axis Encoder quadrature. Corrective Action:
Try the following: n Check that the Encoder Strip is NOT broken or damaged. n Replace the Encoder Strip ⇒ Page 8-34 . n Replace the Carriage Assembly ⇒ Page 8-44 . n If the Error Code continues, replace the Electronics Module ⇒ Page 8-25 . WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. 2-5 HP DesignJets 1050C and 1055CM Printers Service Manual