Smart IP43 Charger 6.3. Bluetooth To prevent unauthorised Bluetooth connections, it is highly recommended to change the default PIN code to a unique PIN code that that offers a greater level of security. 6.3.1. Changing the PIN code The Bluetooth PIN code can be changed using a Bluetooth enabled device (mobile phone or tablet) with the VictronConnect app. To change the Bluetooth PIN code: 1. Connect the Smart IP43 Charger AC power cable to a mains power outlet; after a short delay all LEDs will illuminate briefly, then the LEDs indicating the current charge mode and charge state will illuminate. 2.
Using a Bluetooth enabled device (mobile phone or tablet), open the VictronConnect app and locate the Smart IP43 Charger in the Device list Local page, then connect to the device (the default PIN code is stated on a label located on the side of the charger, or try 000000 if there is no label). 3. Select the Settings icon (gear in the top right corner) to access the Settings page. 4. Select the Device options icon (three vertical dots in the top right corner) to access the Device options dropdown menu. 5. Select Product info from the dropdown menu to access the Product info page. 6. Select CHANGE in the Pin code field to open the Change PIN code pop-up dialog box. 7.
Enter the current PIN code and the desired new PIN code (twice), then select OK ; avoid using a simple PIN code that is easy for someone else to guess, such as 123456. Page 33 Setup