Smart IP43 Charger M. Recondition stage An optional stage that can partially recover/reverse lead acid battery degradation due to sulfation; typically caused by inadequate charging or if the battery is left in a deeply discharged state. N. Configurable output current A fully configurable setting that limits the maximum charge current to a reduced level; beneficial when charging lower capacity batteries with a high current output charger. O.
Recovery function The charger will attempt to recharge a severely discharged battery (even down to 0V) with low current and then resume normal charging once the battery voltage has risen sufficiently; many other chargers will not recognise a battery in this state. P. Power supply mode A specific mode to use the charger as a DC power supply; to power equipment at a constant voltage with or without a battery connected. Page 5 Features