Analog output indicator 1 Digital output 1 indicator 2 Digital output 2 indicator 3 Pressure / parameter display 4 SV / setup item display 5 UP key 6 SET key 7 DOWN key 8 Power supply and output terminals 9 Pressure input pore 10 29 s Power Supply Volta ge range 12 ~ 24 VDC ± 10% no isolation Power c onsumption 40 mA Max.; current output type 60 mA Max. Pressure Measurement Pres sure type Non-corrosive gas, gauge type Measu rable range DPA01: -100 kPa ~ 100 kPa DPA10: -100 kPa ~ 1,000 kPa Max. dur able pressure DPA01: 200 kPa DPA10:
1,500 kPa Measure ment accuracy ± 3% entire process Temperat ure inaccuracy ± 2% entire process Display Setu p display 2-line LCD display, 4 digits for measured value and 3.5 digits for setup display Statu s display LCD output status display Disp lay mode 3 colors for different modes Cycle 250 ms, 500 ms, 1,000 ms Output Numbe r of outputs Built-in 2 NPN or PNP transistor digital outputs and 1 analog output Transi stor output NPN: Max. durable pressure 30V / 100 mA, residual voltage 1.5 V PNP: Max. durable pressure 30V / 100 mA, residual voltage 1.5 V Anal og output 1 ~ 5 V: Min. output load resistance 1,000 Ω 4 ~ 20 mA: Max.
output load resistance 400 Ω; linear inaccuracy Resp onse time 2 ms, 4 ms, 10 ms, 30 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms Output inaccuracy Linear inaccuracy: Shock Resista nce 10 ~ 550 Hz, 100 mm, 3 axes for 2 hours Vibration Resis tance Max. 100 m/s2, 3 axes 6 directions, 3 times each Operating Amb ient Temp erature 0°C ~ 50°C Storage Temperature -20°C ~ 65°C Altitude Operating Relative Humid ity 35% ~ 80% RH (non-condensing) ile & Outline