Chapter 7: sDIO Module Rack-Mounting the sDIO Module To rack-mount the sDIO module in a standard 19-inch equipment rack, you must first install the mounting brackets on each side of the unit, as shown in the following figure. NOTE: These brackets must be ordered separately. They do not come with the sDIO module. 190.0 Units are mm 2x 40356-00003 R 3.6 2x M3 x 6 mm both sides 16.0 43.9 6.1 482.8 462.0 14.0 14.2 3.6 typ. Figure 7-2. Rack-Mounting the sDIO Module SmartController EX User’s Guide, 11069-000 Rev. F Page 58 of 92 31.8