Contents Connections Playback Settings Tips Appendix e r t y qw C SOURCE SELECT knob This selects the input source. ( v p. 83) D Remote control sensor This receives signals from the remote control unit. ( v p. 9) E Display This displays various pieces of information. ( v p. 20) F MASTER VOLUME knob This adjusts the volume level. ( v p. 84) G Tuner preset channel buttons (TUNER PRESET CH +, –) These select preset broadcast stations. ( v p. 100) A Power operation button ( X ) Used to turn the power of the MAIN ZONE (room where this unit is located) on/off (standby). ( v p. 83) H ZONE2 ON/OFF button This turns the power of ZONE2 (another room) on/off. ( v p.
163) B Power indicator This is lit as follows according to the power status: I ZONE2 SOURCE button This selects the input source for ZONE2. ( v p. 163) 0 White: Power on J DIMMER button Each press of this switches the brightness of the display. ( v p. 247) 0 Off: Normal standby 0 Red: K STATUS button Each press of this switches the status information that is shown on the display. 0 When “HDMI Control” is set to “On” ( v p. 189) 0 When “HDMI Pass Through” is set to “On” ( v p. 187) 0 When “Network Control” is set to “Always On” ( v p. 236) Front panel Display Rear panel 18 Remote Index u i o Q0 Q1