Contents Connections Playback Settings Tips Appendix Changing the strength of Tactile Transducer according to the input source (Tactile Transducer) 4 If you selected “On” in step 3, press cursor Down and adjust the “Level”. 5 Use cursor Left/Right to adjust the tone, then press ENTER. Adjusts the volume of the tactile transducer output. 1 Press OPTION. -12.0 dB – +12.0 dB (Default : 0.0 dB) An option menu screen is displayed. 0 When the input source is “HEOS Music”, an option menu for online music is displayed. Select “AVR Options…”, then press ENTER. 2 Use cursor Up/Down to select “Tactile Transducer”, then press ENTER. The “Tactile Transducer” screen is displayed.
3 Use cursor Left/Right to set the tactile transducer function to on/off. 0 “Tactile Transducer” settings are stored for each input source. 0 This cannot be set when the “Speakers” - “Manual Setup” - “Tactile Transducer Setup” - “Tactile Transducer” is set to “Disabled”. On (Default) : Enable tactile Transducer. Off: Disable tactile Transducer. Front panel Display Rear panel 124 Remote Index