Sony — Owner's Manual - Marantz

Contents Connections Playback Settings Tips Appendix Pure Direct playback Auto surround playback This mode is for playback with higher sound quality than in Direct playback mode. This mode turns off the main unit display. Doing so suppresses noise sources that affect sound quality. 1 Press PURE to select “Pure Direct”. This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. Perform stereo playback when the input signal is PCM. When the input signal is Dolby Digital or DTS, the music is played back according to the respective channel number. 1 Press PURE to select “Auto”. The display goes dark, and Pure Direct playback begins.

Auto surround playback begins. 0 In Direct and Pure Direct sound modes, the following items cannot be adjusted. 0 Dialog Enhancer ( v p. 120) 0 Tone ( v p. 122) 0 M-DAX ( v p. 177) 0 MultEQ ® XT32 ( v p. 179) 0 Dynamic EQ ( v p. 180) 0 Dynamic Volume ( v p. 181) 0 Graphic EQ ( v p. 182) 0 This can also be set by pressing PURE DIRECT on the main unit. 0 This can also be set by pressing PURE DIRECT on the main unit. 0 When the Pure Direct mode has been selected, the display turns off after about 5 seconds. NOTE Front panel Display Rear panel 131 Remote Index