Contents Connections Playback Settings Tips Appendix HDMI Control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure 1 Enable the HDMI Control function of this unit. Set “HDMI Control” to “On”. ( v p. 186) 2 Turn the power on for all the devices connected by HDMI cable. 3 Set the HDMI Control function for all devices connected by HDMI cable. 5 Switch the input source of this unit to check that video from the player connected by HDMI is played back correctly.
6 When you turn the TV’s power to standby, check that the power of this unit also goes to standby. 0 Please consult the operating instructions for the connected devices to check the settings. 0 Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand. 0 The HDMI ZONE2 function is not compatible with the HDMI Control function. 0 When the HDMI ZONE2 function is used with “HDMI Control” in the menu set to “On”, the HDMI ZONE2 function may not fully work. NOTE 0 Carry out steps 2 and 3 should any of the devices be unplugged. 4 Switch the television input to the HDMI input connected to this unit.
Front panel Display Rear panel 142 Remote Index