Contents Connections Playback Settings Tips Appendix o Pass Through Source o RC Source Select Selects the HDMI input to pass through the HDMI output when this unit is in standby power mode. Set whether to allow this unit to be turned on by the input source select button on the remote control when this unit is in standby power mode. CBL/SAT / Media Player / Blu-ray / GAME / AUX1 / AUX2 / TV Audio / CD z (Default : CBL/SAT) : Last: Selects the last used HDMI input. Power On + Source (Default) : The power of this unit is turned on and the input source changes. Selects the HDMI input as the standby source.
This unit remains in standby but switches the HDMI input source when you press an input source button. The power display of this unit blinks when the input source select button of the remote control is pressed. z “Pass Through Source” can be set when any of the HDMI connectors is assigned to “CD” for the input source in the “Input Assign” setting. ( v p. 194) Source Select Only: 0 “Pass Through Source” can be set when “HDMI Control” is set to “On” or “HDMI Pass Through” is set to “On”. (“HDMI Pass Through” ( v p. 184), “HDMI Control” ( v p. 186)) 0 “RC Source Select” can be set when “HDMI Control” is set to “On” or “HDMI Pass Through” is set to “On”. (“HDMI Pass Through” ( v p.
184), “HDMI Control” ( v p. 186)) Front panel Display Rear panel 185 Remote Index