Contents Connections Playback Settings Tips Appendix 3 Connect the Sound calibration microphone to the SETUP MIC jack of this unit. 4 Select “Start”, then press ENTER. Audyssey ® Setup can also make the following settings. 0 Amp Assign The signals output from the HEIGHT1 and HEIGHT2 speaker terminals can be switched in accordance with your speaker environment. (“Amp Assign” ( v p. 209)) 0 Channel Select If channels that are not to be used are set in advance, measurement for the set channels is skipped, and measuring time can be reduced. You can also change the number of surround back speakers and subwoofer.
When the Sound calibration microphone is connected, the following screen is displayed. 0 Dolby Speaker Setup Set the distance between the Dolby Atmos Enabled speaker and the ceiling. This can be set when using the Front Dolby Atmos Enabled, Surround Dolby Atmos Enabled or Back Dolby Atmos Enabled speaker. 5 Follow the instructions on the screen display and press “Next” to proceed further. Front panel Display Rear panel 201 Remote Index Audyssey Setup Speaker Preset 1 Your AVR can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand. Set the following items if necessary.
Amp Assign Channel Select Dolby Speaker Setup Start