Contents Connections Playback Settings Tips Appendix 8 Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions. 9 Repeat step 8, measuring positions 3 to 8. 0 To skip measuring the fourth and subsequent listening position, press cursor Left to select “Complete” and press ENTER to proceed to step 11. Audyssey Setup 10 Select “Continue”, then press ENTER. Place the microphone at the ear level of the listener seated at the 2nd listening position, which should be no more than 2 ft (60 cm) away from the 1st listening position, then select "Continue ...
Ear Height 2 Back Continue n Stopping Audyssey ® Setup A Press BACK to display the popup screen. B Press cursor Left to select “Yes”, then press ENTER. Start the analysis and storage of the measurement results. 0 Analysis takes several minutes to complete. The more speakers and measurement positions that there are, the more time it takes to perform the analysis. NOTE 0 When the measurement results are being saved, make sure the power is not turned off. Front panel Display Rear panel 203 Remote Index Audyssey Setup Measurements complete. Select "Continue" to analyze the data... Repeat Last Test Continue