Contents Connections Playback Settings Tips Appendix o Subwoofer level error message and how to adjust 1 Select “SW Level Matching” and then press ENTER. 2 Adjust the volume control on your subwoofer so that the measured level is within the 72 to 78 dB range. 3 When the measured level is within the 72 to 78 dB range, select “Next” and then press ENTER. The optimal level of each subwoofer channel for Audyssey ® Setup measurement is 75 dB. During subwoofer level measurement, an error message is displayed when one level of subwoofers is outside the 72 – 78 dB range.
When using a subwoofer with built-in amplifier (active type), adjust the subwoofer volume so that the subwoofer level is within the 72 to 78 dB range. 0 If you use two subwoofers, the second subwoofer’s adjustment will be started. Repeat the operation from step 2, 3. G Error message H Audyssey Setup Your Subwoofer 1's level is too high. If your subwoofer has a volume control on it, select "SW Level Matching" to interactively adjust the level of your subwoofer. If your subwoofer does not have a volume control, or if you do not want to use a subwoofer, select "Skip". Back Skip SW Level Matching Front panel Display Rear panel 207 Remote Index