Contents Connections Playback Settings Tips Appendix Manual Setup Amp Assign Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. Select the power amplifier usage method to match your speaker system. o Assign Mode 0 If you enable new speakers in the speaker configuration menu after performing Audyssey ® Setup, you will no longer be able to select Audyssey MultEQ ® XT32, Audyssey Dynamic EQ ® or Audyssey Dynamic Volume ® . ( v p. 179) Select how to use the power amp. You need to configure the detailed settings for the speaker configuration in accordance with the selected mode. Select Assign Mode configure the corresponding detailed settings.
0 Changing the following settings: Speaker size (Large or Small) / Distances / Levels / Crossovers settings will not disable Audyssey ® or require running Audyssey ® Setup again. 0 Setting to use the 9-channel power amplifier in this unit and an external power amplifier connected to PRE OUT to play back up to 11.1-channels. 0 “Manual Setup” can be used without changing the settings. Please set if necessary. 11.1ch: 0 You can connect speakers for up to 11.1-channels for MAIN ZONE. Front panel Display Rear panel 209 Remote Index