Sony — Owner's Manual - Marantz

Contents Connections Playback Settings Tips Appendix 0 Setting to assign the power amplifiers o Floor within this unit for connecting the second set of front speakers. Select the floor speakers location. 5ch & SB (Default) : This layout combines a surround back speaker with the basic 5-channel layout. 0 You can switch between the desired combination of front speakers A and front speakers B. This is a basic 5-channel layout that uses front speakers, center speakers and surround speakers. Switch the front speaker using the “Front Speaker” setting. ( v p. 231) 5ch: 7.1ch + Front B: 0 You can connect speakers for up to 9.1- channels for MAIN ZONE.

Speakers to output audio are automatically switched for playing back up to 7.1- channels in accordance with the input signal and sound mode. Preamplifier: 0 All of the speakers are connected using an external power amplifier and this unit is used as a preamplifier. 0 When “Assign Mode” is set to “7.1ch + ZONE2”, “7.1ch (Bi-Amp)” or “7.1ch + Front B” in the menu, the assigned channels are output from HEIGHT2 speaker terminals. 0 When Assign Mode is set to “5.1ch (Bi-Amp) + ZONE2” in the menu, the front channels for Bi-Amp connection are output from HEIGHT1 speaker terminals, and the ZONE2 channels are output from HEIGHT2 speaker terminals. Front panel Display Rear panel 211 Remote Index