Sony — Owner's Manual - Marantz

Contents Connections Playback Settings Tips Appendix o Pre-out o View Terminal Config. When “Assign Mode” is set to “11.1ch”, selects the PRE OUT connector the external power amplifier used in MAIN ZONE. The PRE OUT connectors that can be selected differ depending on the combination of “Floor” and “Height” - “Layout” settings configured in the menu. ( v p. 211) This setting can be set when using 10 channels or more, including the Floor Speaker, Height Speaker and Dolby Speaker. This shows how to connect the speaker terminals and PRE OUT connectors for your “Amp Assign” setting on the menu screen. The Front left and right preamplifier outputs are connected to an external amplifier.

FRONT (Default) : HEIGHT 2 z : The Height2 left and right preamplifier outputs are connected to an external amplifier. SURROUND BACK z : The Surround Back left and right preamplifier outputs are connected to an external amplifier. z The name of the speaker is displayed that is set for the HEIGHT 2 or SURROUND BACK speaker terminals by the “Height” - “Layout” setting in the menu. Front panel Display Rear panel 218 Remote Index