Contents Connections Playback Settings Tips Appendix o Subwoofer Mode o Subwoofer Layout When you are using multiple subwoofers, set the audio to be output from the subwoofer. When you are using multiple subwoofers, configure the subwoofer layout. The layouts that can be selected differ depending on the configuration of “Subwoofer Mode”. Standard (Default) : All subwoofers output LFE signals and bass below the crossover frequency of all the speakers. [When “Subwoofer” is set to “2 spkrs”] All subwoofers output LFE signals. In addition, each subwoofer outputs bass below the crossover frequency of speakers that are placed near them. Left/Right (Default) :
Place subwoofers symmetrically on the front side. Directional: Place a subwoofer in the middle of the front side and another in the middle of the rear side. Front/Rear: [When “Subwoofer” is set to “3 spkrs”] 0 This can be set when “Subwoofer” is set to “4 spkrs”, “3 spkrs” or “2 spkrs”. Place subwoofers symmetrically on the front side and one in the middle of the rear side. FL/FR/Rear: [When “Subwoofer” is set to “4 spkrs”] FL/FR/RL/RR: Place the subwoofers in the four corners of the room. Front panel Display Rear panel 220 Remote Index