Contents Connections Playback Settings Tips Appendix Wi-Fi Setup o Use iOS Device Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. Use your iOS device (iPhone/iPod/iPad) to connect to the network. By connecting your iOS device to this unit using Wi-Fi, the unit can be automatically connected to the same network as your device. 1. Select “Use iOS Device” on the TV screen. 2. Check that your iOS device is connected to the wireless LAN (Wi- Fi) router and select “Marantz CINEMA 50” from “SET UP NEW AIRPLAY SPEAKER...” at the bottom of the Wi-Fi configuration screen of your iOS device. 3.
Tap “Next” on the screen of the iOS device. o Scan Networks Select the network you wish to connect to from the list of possible networks shown on the TV screen. 1. Select the network you wish to connect to from the list of wireless networks. Select “Rescan” if the network cannot be found. 2. Enter your password and select “OK”. 0 The iOS device firmware version needs to support iOS 10.0.2 or later. Front panel Display Rear panel 235 Remote Index