Sony — Owner's Manual - Marantz

Contents Connections Playback Settings Tips Appendix Settings o DHCP Configure the IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit. Selects how to connect to the network. On (Default) : Configure the network settings automatically from your router. Off: Configure the network settings manually. 0 Set up the IP Address, Subnet Mask, Default Gateway and DNS server information only when assigning a fixed IP address or when connecting to a network without DHCP function.

o IP Address Set the IP address within the ranges shown below. 0 The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.1 - 10.255.255.254 CLASS B: 172.16.0.1 - 172.31.255.254 CLASS C: 192.168.0.1 - 192.168.255.254 Network/Settings DHCP -IP Address -Subnet Mask 0 0 0 . 0 0 0 . 0 0 0 . 0 0 0 0 0 0 . 0 0 0 . 0 0 0 . 0 0 0 Off -Default Gateway -DNS 0 0 0 . 0 0 0 . 0 0 0 . 0 0 0 0 0 0 . 0 0 0 . 0 0 0 . 0 0 0 o Subnet Mask Cancel Save When connecting an xDSL modem or connector adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input “255.255.255.0”.

Configures the network settings automatically or manually. Front panel Display Rear panel 237 Remote Index