Contents Connections Playback Settings Tips Appendix o Allow Update Enable or disable updates for this unit. On (Default) : Enables this unit to receive updates. Off: Prevents this unit from receiving update. 0 This setting causes Incompatibilities between this unit and HEOS App. Front panel Display Rear panel 253 Remote Index Notes concerning use of “ Update” 0 In order to use these functions, you must have the correct system requirements and settings for an Internet connection. (v p. 70) 0 Do not turn off the power until updating is completed. 0 Approximately 1 hour is required for the updating procedure to be completed.
0 Once updating starts, normal operations on this unit cannot be performed until updating is completed. Furthermore, there may be cases where backup data is reset for the parameters, etc., set on this unit. 0 If the update fails, press and hold the X on the main unit for more than 5 seconds, or remove and re-insert the power cord. After about 1 minute, “Please wait” appears on the display and update restarts. If the error continues, check the network environment.