Contents Connections Playback Settings Tips Appendix No sound is produced from subwoofer. 0 Check the subwoofer connections. 0 Turn on the subwoofer’s power. 0 Set “Speaker Configuration” - “Subwoofer” in the menu to “1 spkr”, “2 spkrs”, “3 spkrs” or “4 spkrs”. ( v p. 219) 0 When “Speaker Configuration” - “Front” in the menu is set to “Large”, depending on the input signal and the sound mode, no sound may be output from the subwoofer. ( v p. 219) 0 When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the subwoofer. ( v p. 230) 0 You can make the subwoofer always output sound by setting the “Subwoofer Output” to “LFE + Main”. ( v p.
230) DTS sound is not output. 0 Check that the digital audio output setting on the connected device is set to “DTS”. Dolby Atmos, Dolby TrueHD, DTS-HD, Dolby Digital Plus audio is not output. 0 Make HDMI connections. ( v p. 62) 0 Check the digital audio output setting on the connected device. On some devices, “PCM” is set by default. DTS Neural:X mode cannot be selected. Dolby Surround mode cannot be selected. 0 DTS Neural:X cannot be selected when using the headphones. 0 Dolby Surround cannot be selected when using the headphones. IMAX DTS:X cannot be selected. 0 IMAX DTS:X and IMAX DTS cannot be selected but DTS:X and DTS can be selected, when the headphones are used.
Sound modes other than “Stereo” or “Direct” cannot be selected. 0 Only “Stereo” or “Direct” can be selected for the sound mode if Headphone:X signals are input. Front panel Display Rear panel 268 Remote Index