Contents Connections Playback Settings Tips Appendix z 1 During playback in Pure Direct mode, the surround parameters are the same as in Direct mode. z 2 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played. z 3 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X, DTS-HD or DTS signal is played. z 4 This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input. z 5 This can be set when the LFE signal is included in the input signal. z 6 This item can be selected when Height, Ceiling or Dolby Atmos Enabled speakers are used.
z 7 This item can be set when any Height, Ceiling or Dolby Atmos Enabled speakers are not used, or Surround speakers are not used. z 8 This item can be selected when “Surround Parameter” - “IMAX Audio Settings” in the menu is set to “Manual”. ( v p. 173) z 9 This item cannot be set when “Dynamic EQ” is set to “On”. ( v p. 180) z 10 This item cannot be set when “Speaker Configuration” - “Subwoofer” in the menu is set to “None”. ( v p. 219) z 11 This item cannot be set when Audyssey ® Setup (Speaker Calibration) has not been performed. z 12 This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input.
z 13 This item cannot be set when sound mode is “DTS Virtual:X” or sound mode that have “+Virtual:X” in the sound mode name. z 14 This item cannot be set when “MultEQ ® XT32” in the menu is set to “Off”. ( v p. 179) z 15 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz. z 16 This setting is available when “Bass” - “Subwoofer Output” in the menu is set to “LFE + Main”. ( v p. 230) z 17 This item can be set when “Speaker Configuration” - “Front” is set to “Small” or “Bass” - “Subwoofer Output” is set to “LFE + Main”. ( v p. 219, 230) z 18 This cannot be set if the input signal contains Auro-3D signals containing a Height channel.
z 19 This can be set if the input signal contains an Auro-3D signal. Front panel Display Rear panel 301 Remote Index