Contents Connections Playback Settings Tips Appendix o Recommended placement of the speakers 0 This unit is compatible with Dolby Atmos and DTS:X which offers an even wider and deeper surround sensation. 0 The “Speaker Virtualizer” must be set to “On” for Dolby Atmos playback with 5.1- channel speaker configurations or less. ( v p. 172) 0 IMAX DTS:X / DTS:X can be selected regardless of the speaker configuration. 0 Auro-3D recommends adding FRONT HEIGHT and SURROUND HEIGHT speakers to a 5.1 speaker configuration. Optionally, you may substitute REAR HEIGHT, Dolby Atmos Enabled speakers instead of FRONT HEIGHT and SURROUND HEIGHT speakers for Dolby Atmos, DTS:X and Auro-3D playback.
Floor speakers Layout 0 Use the following illustration as a guide for the installation location of each floor speaker. You do not have to match them exactly. SW C z 2 z 1 z 3 SL SR SBL SBR z 1 22° - 30° z 2 90° - 110° z 3 135° - 150° 0 If you are not using the surround back speakers, the recommended angle of the surround sound speakers ( z 2) is 120°. 0 When using a single surround back speaker, place it directly behind the listening position. Front panel Display Rear panel 36 Remote Index