Contents Connections Playback Settings Tips Appendix o Connecting the speaker cables o Connecting the subwoofer Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. 1 Peel off about 3/8 inch (10 mm) of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it. Use a subwoofer cable to connect the subwoofer. Four subwoofers can be connected to this unit.
When you are connecting multiple subwoofers, change the setting of “Subwoofer” in the “Speaker Configuration” setting according to the number of subwoofers to be connected. ( v p. 219) The level and distance can be set separately for Subwoofer 1, Subwoofer 2, Subwoofer 3 and Subwoofer 4. SW1 SW2 2 Turn the speaker terminal counterclockwise to loosen it. 3 Insert the speaker cable’s core wire to the hilt into the speaker terminal. 4 Turn the speaker terminal clockwise to tighten it. SW3 SW4 Front panel Display Rear panel 39 Remote Index