Contents Connections Playback Settings Tips Appendix Connection 1 : TV equipped with an HDMI connector and compatible with the ARC / eARC Using a high quality HDMI cable z , connect one end to the HDMI port labeled “eARC” or “ARC” on your TV. Connect the other end to the HDMI OUT MONITOR 1 port on this unit. When a TV with eARC support is connected, the eARC function of this unit is enabled automatically and the television audio is played back. When a TV with ARC support is connected, set “ARC” in the menu to “On”. ( v p. 186) (ARC / eARC) IN HDMI TV z For 4K TVs we recommend using an HDMI cable labeled “High Speed” and “with Ethernet”.
z For 8K TVs we recommend using an HDMI cable labeled “Ultra High Speed”. 0 eARC function settings may be required depending on the eARC function-compatible television you are using. Make sure eARC is set to on if this setting exists on your television. For more information, check your television’s owner’s manual. 0 Set “4K/8K Signal Format” to “8K Enhanced” in the menu to enjoy 8K video. ( v p. 191) Front panel Display Rear panel 59 Remote Index