Contents Connections Playback Settings Tips Appendix o HDMI PassThrough o RC Select Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode. Set whether to allow this unit to be turned on by the input source select button on the remote control when this unit is on standby. On: Transmits the selected HDMI input through this unit’s HDMI output when this unit is in standby power mode. Power On+Source (Default) : The power of this unit is turned on and the input source changes. No HDMI signals are transmitted through this unit’s HDMI output in standby power mode. The HDMI input source changes while this unit is on standby.
The power display of this unit blinks when the input source select button of the remote control is pressed. Off (Default) : Source Only: o Pass Source Sets the HDMI connector that inputs HDMI signals when in standby. Last (Default) : The most recently used input source will go into standby mode. 0 “RC Select” can be set when “HDMI Control” is set to “On” or “HDMI PassThrough” is set to “On”. (“HDMI PassThrough” ( v p. 152), “HDMI Control” ( v p. 153)) CBL/SAT / DVD / Blu-ray / Game / AUX / Media Player Pass through the selected input source. 0 “Pass Source” can be set when “HDMI PassThrough” is set to “On” or “HDMI Control” is set to “On”. (“HDMI PassThrough” ( v p.
152), “HDMI Control” ( v p. 153)) Front panel Display Rear panel 152 Remote Index