Contents Connections Playback Settings Tips Appendix 9 Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions. 10 Repeat step 9, measuring positions 3 to 8. 0 To skip measuring the fourth and subsequent listening position, press o to select “Complete” and press ENTER to proceed to step 12. Audyssey Setup 11 Select “Continue”, then press ENTER. Place the microphone ear level at the 2nd listening position, which should be no more than 60cm away from the 1st position, then select “Continue”... Measurements Complete. Select “Continue” to analyze the data...
Audyssey Setup Ear Height Continue Back n Stopping Audyssey ® Setup A Press BACK to display the popup screen. B Press o to select “Yes”, then press ENTER. Start the analysis and storage of the measurement results. Continue Repeat Last Test 0 Analysis takes several minutes to complete. The more speakers and measurement positions that there are, the more time it takes to perform the analysis. NOTE 0 When the measurement results are being saved, make sure the power is not turned off. Front panel Display Rear panel 169 Remote Index