Contents Connections Playback Settings Tips Appendix o Manual Settings Enter the name (SSID) and password of the network you wish to connect to. Configure the IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit. 1. Set the following items. SSID: Input the name of the wireless network (SSID). 0 Set up the IP Address, Subnet Mask, Default Gateway and DNS server information only when assigning a fixed IP address or when connecting to a network without DHCP function. Security:
Select the encryption method according to the encryption setting of the access point you are using. Password: Input the password. 2. Select “Connect” at the end of the setting. DHCP Settings Off 000. 000. 000. 000 000. 000. 000. 000 000. 000. 000. 000 000. 000. 000. 000 -IP Address -Subnet Mask -Default Gateway -DNS 0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or tablet that supports wireless LAN connection. 1. Press and hold the DIMMER and STATUS buttons on the main unit for at least 3 seconds when the power of the unit is on. 2.
Connect the wireless LAN of the PC or tablet used to “Denon AVR-X1400H” when the message “Connect your Wi-Fi device to Wi-Fi network called “Denon AVR-X1400H”” appears in the display. 3. Start up the browser and enter “192.168.1.16/Settings/” in the URL. 4. Use the browser to enter the settings, select “Connect” and then exit the settings. Save Cancel 0 The Default key of this unit is fixed at “1”. Set Default key of the router to “1” to use. Front panel Display Rear panel 187 Remote Index