Contents Connections Playback Settings Tips Appendix Save & Load Setup Lock Save and restore device settings by using a USB memory device. Protect settings from inadvertent changes. 0 Use a USB memory device that has at least 128 MB of free space and is formatted to FAT32. Data may not Save/Load correctly to some USB memory devices. 0 It may take up to 10 minutes for data to Save/Load. Do not turn off the power until the process is complete. o Lock On: Turn protection on. Off (Default) : Turn protection off. o Save Configuration Current unit settings are stored on the USB memory device.
When the settings are saved correctly, “Saved” appears on the display and the file “config.avr” is created on the USB memory device. 0 When cancelling the setting, set “Lock” to “Off”. 0 When “Lock” is set to “On”, no setting items are displayed except for “Setup Lock”. NOTE 0 Do not change the file name of the created file. Doing so will prevent the file from being recognized as a settings file when restoring. o Load Configuration Settings saved on the USB memory device are restored. When the saved settings are restored correctly, “Loaded” appears on the display and the unit automatically restarts. Front panel Display Rear panel 202 Remote Index