Contents Connections Playback Settings Tips Appendix Speaker configuration and “Amp Assign” settings This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing the “Amp Assign” settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone playback. ( v p. 174) Perform “Amp Assign” settings to suit the number of rooms and speaker configuration to be installed. ( v p. 174) 0 The sound mode that can be selected varies according to the speaker configuration. See “Sound modes and channel output” ( v p.
233) for the sound modes that are supported. Front panel Display Rear panel 38 Remote Index Playback speaker and zone “Amp Assign” settings Connection MAIN ZONE ZONE2 page 5.1-channel Not used Can be set in all “Amp Assign” modes.
39 7.1-channel (surround back) Not used Surround Back (Default) 40 7.1-channel (front height) Not used Front Height 41 7.1-channel (top front) Not used Top Front 42 7.1-channel (top middle) Not used Top Middle 43 7.1-channel (front Dolby Atmos Enabled speaker) Not used Front Dolby 44 7.1-channel (surround Dolby Atmos Enabled speaker) Not used Surround Dolby 45 5.1-channel (bi-amp connection for front speaker) Not used Bi-Amp 46 5.1-channel + second pair of front speaker Not used Front B 47 2-channel (Speaker out) 5.1-channel ZONE2 48