Contents Connections Playback Settings Tips Appendix Tuning in by entering the frequency (Direct Tune) RDS Search RDS is a broadcasting service which allows a station to send additional information along with the regular radio program signal. Use this function to automatically tune to FM stations that provide the RDS service. Note that the RDS function only works when receiving RDS compatible stations. 1 Press OPTION when the input source is “Tuner”. You can enter the receiving frequency directly to tune in. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Direct Tune”, then press ENTER.
The screen that lets you enter the frequency is displayed. 3 Use ui to select a number, then press p . The option menu screen is displayed. 2 Use ui to select “RDS Search”, then press ENTER. 3 Press ENTER. 0 If o is pressed, the immediately preceding input is cancelled. 4 Repeat step 3 and enter the frequency of the radio station you want to hear. 5 When setting is completed, press ENTER. The search for RDS stations begins automatically. 0 If you use o p within 5 seconds after the broadcast station name is shown on the display, you can search for a different station. The preset frequency is tuned in. Front panel Display Rear panel 77 Remote Index