CAR813 Rear RCA Input A/V IN Connect an optional audio/video source into the RCA (rear) input. Adjust volume on the external audio source as needed (if connected to the headphone output of the device). Front and Rear Camera Operation - (Optional) Using the Cameras Connect an optional camera to the front or rear Camera Input. Refer to the wiring diagram for details. The unit will automatically select camera mode when connected to the reverse lamp circuitry. Auto Selection Touch the CAMERA icon on the Main Menu (when enabled) to select camera mode. Touch the top left area of the screen to return to the Main Menu to turn this feature off. Note :
The manual mode is for dedicated cameras that are connected to the 12VDC+ ignition wire and are always on while driving, it is not meant for cameras that are connected to the vehicle's reverse light. Adjusting Front and Rear Camera Screen Image If your front or rear cameras appear to have a reversed image on the radio’s display, go into the Camera section in the Settings menu to reverse the image of the camera. To do this, toggle the "Rear Camera View Reverse" or "Front Camera View Reverse" function to correct the viewing angle of the camera(s). 23