English Attaching Peripheral Devices To attach a peripheral device, connect the device to the connector at the bottom of the SR-610 and clamp the cables of the device with the cable clamp. 1. Open the cable clamp. See Illustration R . 2. Set the cables inside the cable clamp. 3. Close the cable clamp. See Illustration S . Keyboard/Mouse The SR-610 has 2 connectors for the keyboard and mouse; one is inside the front switch cover, and another is at the bottom of the front switch cover. However, only one of them can be used at a time. Use the DIP switch at the bottom of the SR-610 to switch the connectors. Maintenance Cleaning CAUTION:
Never clean the product with alcohol, benzine, thinner, or other such solvents. Doing so may damage or break the parts made of plastic and rubber. Display Wipe away the dirt with a cloth that is dry or slightly moistened with ethanol or isopropyl alcohol. Keyboard Remove dust with a vacuum cleaner. SR-610 Remove dust around the openings with a vacuum cleaner. 10 SR-610 User’s Manual DIP switch - 5 Connector location OFF Front ON Bottom