Drives and Drive Media Removing a Disc (With Power) 1. Turn on the notebook. 2. Press the release button 1 on the drive bezel to release the media tray, then pull the tray outward until it is fully extended 2 . 3. Remove the disc from the tray by gently pushing down on the spindle while pulling up on the outer edges of the disc 3 . Handle the disc by the edges, not the flat surfaces. If the media tray is not fully extended, tilt the disc as you remove it. 4. Close the media tray 4 . 5. Place the disc in a protective case. Removing a disc from the optical drive when power is available 5–6 Startup and Reference Guide—Part 2