MIL MIL-HDBK-683(AT) — MIL-HDBK-683(AT) Statistical Process Control (SPC) Handbook - Implementation & Evaluation PDF

Downloaded from https://www.everyspec.com MIL-HDBK-683(AT) d. Chapter 5: This chapter proposes a format for evaluating SPC ~p~ in a supplier-s facility. Each eupplier-s approach will differ slightly according to manufacturing technology and management philosophy. It is imprtant to be able to assess these differences, and to ensure that the swplier”s objectives match the Army-s requiremds. e. Chapters 6and7: Chapter 6 describes some of the SPC software programe available and Chapter 7 provides some guidelines for evaluating this software, without making any specific recomen dations.

Software selection and installation can become a project in itself depending on the degree of sophistication of the 8ystem and integration with real-time control. f. Chapter 8: This chapter offers requirements and Otan&rds as an aid in selecting a consulting firm to help with SFC implementation. The objective here is to provide the means for making an informed selection @ asking the right questions and comparing answerB. 13- Chapter 9: This chapter contains miscellaneous notes. 1.4 smmaz!y.

In conclusion, this material should be considered a bridge between 6FC theory end application and a reference document to evaluate SPC programs and tools- Quality and productivity improvement starts with basic technical knowledge, but will not be fully realized without a structured program for applying the knowledge and sustaining the improvements through continuous monitoring feedback and conxnitmentto correct problems when identified. 2