MIL MIL-HDBK-683(AT) — MIL-HDBK-683(AT) Statistical Process Control (SPC) Handbook - Implementation & Evaluation PDF

Downloaded from https://www.everyspec.com MIIADBK-683(AT ) USL The upper engineering specification limit. x An individual value, upon which other subgroup statistics are based. The average of values in a subgroup. The average of subgroup averages (weighted if necessary by sample size); the measured process average. The number of standard deviation units from the process average to a value of interest such as an engineering specification. When used in capability assessment. ZUSL is the distance to the upper specification limit, &L is the distance to the lower specification limit, and ~~ is the distance to the nearest specification limit.

..x-r~ r = UST,- X c ZL6L ZW6L Zmin The minimum value of the (ZUL, ZUGL). S(sigma) The standard deviation of the distribution of individual values of a process characteristic, defined ae follows: b~nding on the value of N A e An estimate of the standard deviation of the distribution of individual values of ~ process characteristic, defined as: R/dz. N(YTE- Consi~ratlon shouldbe given when~is used. One should realize that there exists a #respective of individual values, and a ~respective of sampling data averages, The difference in the two may be expressed as: The mmbol~ is often mistakenly ueed interchangeablywith a. dA =&.i/fi 12 =— .