MIL MIL-HDBK-683(AT) — MIL-HDBK-683(AT) Statistical Process Control (SPC) Handbook - Implementation & Evaluation PDF

Downloaded from https://www.everyspec.com ~7 KVAIAJATIONGUIDE FOR SUPPLIER-S SFC SOFTHARK MIL-KDBK-683(AT) 7.1 . . This chapter provides checklist fomats for use in waluating SFC eoftware. The first checklist (figure 19-7) evaluatet3the software using the essential characteri8tlc8 spcified in 6.4 as the basis for acceptability. Once the essential features of the software have been evaluated, a mmple comparison matrix (figure 20-7) is ~ided to assist in evaluating supplier busine8c3practices, krdware considerations, price and other factore which influence the final selection.

In figure 19-7, an acceptable rating for an item indicates that the characteristic meets the real tk criteria s~ified in 6.4.1 and that there is no noticeable difficulty in using the feature. A marginal rating is assigned when the feature meets the real time criteria tit there is some difficulty in accessing it. Unacceptable indicates that the characteristic is not included or cannot be used or that it does not meet the real time criteria. Since most SFC software is constructed in a modular fashion, the ratings can only be applied to individual modules being evaluated.

It is possible, or even likely, that a particular software package will have acceptable ratings for sune characteristics and marginal or unacceptable ratings for others- 7.2 e The checklist (figure 19-7) will allow evaluation of the software for essential characteristics that will be used every &y on the manufacturing floor. For many potential users, the need for support from the software supplier is equally important. An indication of the software supplier-s business practices maY be gained by looking into the items listed below (see figure 20-7): a. Suppliers who can provide a users list and telephone contact nunbers should be encouraged to do so.

One of the easiest ways to build confidence in a particular software program is to find a number of companies who are using it on a day-to-day basis. It is well worth a trip to nearby users to learn first hand their experiences with the software under consideration, but this should be required only after the list has ken wed to three or four contenders. b- Software suppliers who are willing to provide their product on a trial basis or with a money back guarantee generally have had the prduct tested under operating conditions and their offers should be accepted, especially, if this is your first adventure into the world of SPC software. 80