S UPER 370DE6/370DER/370DEI User's Manual 370DER Quick Reference Jumpers Description Default Setting JA2 LVD SCSI Ch A Term. Open (Enabled) JA4 LVD SCSI Ch B Term. Open (Enabled) JA6 Manufacturer's Setting Always Closed JBT1 CMOS Clear Pin 1-2 (Normal) JP1 FSB Speed Setting Pin 1-2 (Auto) JP3 Spread Spectrum Enable Closed (Disabled) JP56 Speaker Enable/Disable On (Enabled) JP57 BIOS Select Pin 1-2 (BIOS1) JP58 LAN1 Enable/Disable Off (Enabled) JP60 VGA Enable/Disable Pin 2-3 (Enabled) JP61 VGA Interrupt Enable Pin 2-3 (Enabled) JP62 LAN2 Enable/Disable Off (Enabled) *JP63 (Notes) Chipset Speed Setting Off (133 MHz) JP64 SCSI Enable/Disable Pin 1-2 (Enabled) (*Note 1:
for 370DER V.1.00 only.) (*Note 2:
If the FSB speed is 100MHz, JP63 should be set to "on".) Introduction DIP Switches Description Default Setting SW1(1-4) CPU Core/Bus Ratio Connectors Description ATX POWER Primary ATX Power Connector BANK0/BANK1 Memory (RAM) Slots COM1/COM2 COM1/2 Serial Port Conn/Header CPU/CH/OH FAN CPU/Overheat/Chassis Fan Headers J13, J14 IDE Hard Disk Drive Connectors J15 Floppy Disk Drive Connector J16 Parallel Printer Port J18 PS/2 Keyboard/Mouse J214 USB0 Header JA1 Ultra160 Channel A LVD SCSI JA3 Ultra160 Channel B LVD SCSI JF1 Front Control Panel LAN1/LAN2 Ethernet Port 1 / Ethernet Port 2 PWR_SEC Secondary ATX Power Connector SLED1 SCSI Active LED header USB Universal Serial Bus Ports VGA Onboard VGA Monitor Connector WOL Wake-on-LAN Header WOR Wake-on-Ring Header *Notes:
Please refer to Chapter 2 for detailed information on jumper settings and pin definitions. 1-12