Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the A+ Server 1122GG-TF. Installation and maintenance should be performed by experienced technicians only. The A+ Server 1122GG-TF is a 1U rackmount server based on the SC118GTS-1400BP server chassis and the Supermicro H8DGG-QF serverboards. Manual Organization Chapter 1: Introduction The first chapter provides a checklist of the main components included with the server system and describes the main features of the Super H8DGG-QF serverboard and the SC118GTS-1400BP chassis. Chapter 2:
Server Installation This chapter describes the steps necessary to install the A+ Server 1122GG-TF into a rack and check out the server configuration prior to powering up the system. If your server was ordered without the processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3: System Interface Refer to this chapter for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Chapter 4:
Warning Statements for AC Systems You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the A+ Server 1122GG-TF. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the H8DGG-QF serverboard, including the locations and functions of connectors, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when reconfiguring the serverboard. iii