A+ Server 1122GG-TF User's Manual Enabling SATA RAID in the BIOS Before installing the Windows Operating System, you must change some settings in BIOS. Boot up the system and hit the key to enter the BIOS Setup Utlility. After the Setup Utility loads, 1. Use the arrow keys to move to the Exit menu. Scroll down with the arrow keys to the "Load Optimal Defaults setting and press . Select "OK" to confirm, then to load the default settings. 2. Use the arrow keys to move to the "Advanced" menu, scroll down to "Advanced Chipset Control" and then select "SouthBridge Configuration". Once in this submenu, scroll down to "OnChip SATA Type" and choose the "RAID" option (see Figure 5-6). Figure 5-6.
BIOS Setup Screen 3. Hit the key twice and scroll to the Exit menu. Select "Save Changes and 4. After exiting the BIOS Setup Utility, the system will reboot. When prompted dur Exit" and hit , then hit again to verify. ing the startup, press the key when prompted to run the Adaptec RAID Utility program (see Figure 5-7). 5-22