Chapter 7: BIOS Power Down Mode This sets the DDR power down mode. Options are Auto , Channel and Chip Select. DRAM Parity Enable This sets the DRAM Parity Enable to either Auto , Enabled and Disabled. Bank Swizzle Mode This sets the Bank Swizzle Mode to either Auto , Enabled and Disabled. ECC Configuration ECC Mode This submenu sets the level of ECC protection. Options include Disabled, Basic , Good, Super, Max and User. Selecting User activates the other op tions for user setting. Note: The "Super" ECC mode dynamically sets the DRAM scrub rate so all of memory is scrubbed in 8-hours.
DRAM ECC Enable This setting allows hardware to report and correct memory errors auto matically, maintaining system integrity. Options are Enabled or Disabled. DRAM Scrub Redirect This setting allows the system to correct DRAM ECC errors immediately when they occur, even if background scrubbing is off. Options are Enabled or Disabled . 4-Bit ECC Mode Allows the user to enabled 4-bit ECC mode (also known as ECC Chipkill). Options are Enabled and Disabled. DRAM BG Scrub Corrects memory errors so later reads are correct. Options are Disabled and various times in nanoseconds and microseconds. Data Cache BG Scrub Allows L1 cache RAM to be corrected when idle.
Options are Disabled and various times in nanoseconds and microseconds. 7-5