Supermicro P3TDLR — Supermicro P3TDLR Motherboard User's Manual PDF (Revision 1.0a)

S UPER P3TDLR User's Manual Floppy Configuration Floppy A Use this option to specify which of floppy drive you have installed in the A drive. The settings are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/ 2", 1.44 MB 3 1/2" and 2.88 MB 3 1/2". Floppy B Use this option to specify which of floppy drive you have installed in the B drive. The settings are Disabled , 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2", 1.44 MB 3 1/2" and 2.88 MB 3 1/2". Diskette Write Protect This option allows you to prevent any writing to your floppy diskette. The settings are Enabled and Disabled . The Enabled setting is effective only if the device is accessed through BIOS.

Floppy Drive Seek Use this option to Enable or Disable the floppy seek routine on bootup. BIOS Boot Settings Configuration Quick Boot This option allows the BIOS to skip certain tests that are normally performed on boot up. You can disable the option to speed up boot time. The settings are Disabled and Enabled . Quiet Boot If Disabled, this option will cause the normal POST messages to be dis- played upon setup. When Enabled, the OEM logo is displayed instead of the POST messages. The default setting is Disabled . Add-On ROM Display Mode Set this option to display add-on ROM (read-only memory) messages. The settings for this option are Force BIOS and Keep Current.

Force BIOS allows the computer to force a third party BIOS to display during system boot. Keep Current has the system display AMIBIOS information on bootup. 4-10