S UPER P3TDLR User's Manual Wait for F1 if Error This settings for this option are Enabled and Disabled. Disabled: This prevents the AMIBIOS to wait on an error for user intervention. This setting should be used if there is a known reason for a BIOS error to appear. An example would be a system administrator must remote boot the system when the computer system does not have a keyboard currently attached. If this setting is set, the system will continue to bootup into the operating system. If "F1" is enabled, the system will wait until the BIOS setup is entered. Enabled: This option configures the system BIOS to wait for any error.
If an error is detected, pressing will enter Setup and the BIOS setting can be adjusted to fix the problem. This normally happens when upgrading the hardware and not setting the BIOS to recognize it. Press Message Display This option tells the system to display or not display the "Hit Delete to Enter Setup" message. The settings are Enabled and Disabled. Internal Cache This option is for enabling or disabling the internal CPU L1 cache. Settings include Disabled, Write-Thru and Write-Back and Reserved. Disabled: This option prevents the system from using the internal CPU L1 cache. This setting should be used to slow the computer system down or to trouble- shoot error messages. Write-Thru:
This option allows the computer system to use the internal CPU L1 cache as Write-Though cache. Write-Through cache is slower than Write-Back cache. It performs write operations to the internal L1 CPU cache and system memory simultaneously. Write-Back This option allows the computer system to use the internal CPU L1 cache as Write-Back cache. Write-Back cache is faster than Write-Through cache. Write-Back cache is a caching method in which modifications to data in the cache aren’t copied to the cache source until absolutely necessary. Write- back caching is available on all CPUs supported by this BIOS.
With these CPUs, write operations stored in the L1 cache aren’t copied to main memory until absolutely necessary. Write-Back cache is the default setting. BIOS External Cache This option is for enabling or disabling the internal CPU L2 cache. Settings include Disabled, Write-Thru and Write-Back . See description above. 4-12