Supermicro P3TDLR — Supermicro P3TDLR Motherboard User's Manual PDF (Revision 1.0a)

S UPER P3TDLR User’s Manual Check Point Description 10 The keyboard controller command byte is written. Next, issuing the pin 23 and 24 blocking and unblocking commands. 11 Next, checking if the keys were pressed during power on. Initializing CMOS RAM if the Initialize CMOS RAM in every boot AMIBIOS POST option was set in AMIBCP or the key was pressed. 12 Next, disabling DMA controllers 1 and 2 and interrupt controllers 1 and 2. 13 The video display has been disabled. Port B has been initialized. Next, initializing the chipset. 14 The 8254 timer test will begin next. 19 The 8254 timer test is over. Starting the memory refresh test next. 1A The memory refresh test line is toggling.

Checking the 15 second on/off time next. 23 Reading the 8042 input port and disabling the MEGAKEY Green PC feature next. Making the BIOS code segment writable and performing any necessary configuration before initializing the interrupt vectors. 24 The configuration required before interrupt vector initialization has completed. Interrupt vector initialization is done. Clearing the password if the POST DIAG switch is on. 25 Interrupt vector initialization is done. Clearing the password if the POST DIAG Switch is on. 27 Any initialization before setting video mode will be done next. B-2