S UPER P3TDLR User’s Manual Check Point Description 60 The DMA page register test passed. Performing the DMA Controller 1 base register test next. 62 The DMA controller 1 base register test passed. Performing the DMA controller 2 base register test next. 65 The DMA controller 2 base register test passed. Programming DMA controllers 1 and 2 next. 66 Completed programming DMA controllers 1 and 2. Initializing the 8259 interrupt controller next. 7F Extended NMI source enabling is in progress. 80 The keyboard test has started. Clearing the output buffer and checking for stuck keys. Issuing the keyboard reset command next. 81 A keyboard reset error or stuck key was found.
Issuing the keyboard controller interface test command next. 82 The keyboard controller interface test completed. Writing the command byte and initializing the circular buffer next. 83 The command byte was written and global data initialization has been completed. Checking for a locked key next. 84 Locked key checking is over. Checking for a memory size mismatch with CMOS RAM data next. 85 The memory size check is done. Displaying a soft error and checking for a password or bypassing WINBIOS Setup next. 86 The password was checked. Performing any required programming before WINBIOS Setup next. B-6