Supermicro P3TDLR — Supermicro P3TDLR Motherboard User's Manual PDF (Revision 1.0a)

S UPER P3TDLR User’s Manual Check Point Description 99 Any initialization required after the option ROM test has been completed. Configuring the timer data area and printer base address next. 9A Set the timer and printer base addresses. Setting the RS-232 base address next. 9B Returned after setting the RS-232 base address. Performing any required initialization before the Coprocessor test next. 9C Required initialization before the Coprocessor test is over. Initializing the Coprocessor next. 9D Coprocessor initialized. Performing any required initialization after the Coprocessor test next. 9E Initialization after the Coprocessor test is complete.

Checking the extended keyboard, keyboard ID, and Num Lock key next. Issuing the keyboard ID command next. A2 Displaying any soft errors next. A3 The soft error display has completed. Setting the keyboard typematic rate next. A4 The keyboard typematic rate is set. Programming the memory wait states next. A5 Memory wait state programming is over. Clearing the screen and enabling parity and the NMI next. A7 NMI and parity enabled. Performing any initialization required before passing control to the adaptor ROM at E000 next. A8 Initialization before passing control to the adaptor ROM at E000h completed. Passing control to the adaptor ROM at E000h next. B-8