Supermicro · 6028R-E1CR12H · 80 pp.

Supermicro SUPER STORAGE SYSTEM 6028R-E1CR12H — User's Manual

Related manuals

Contents

Document text

Appendix B System Specifications

Preface The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Preface About This Manual Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software and docu­ mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the 6028R-E1CR12H. Installation and maintainance should be performed by experienced technicians only.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. The 6028R-E1CR12H is a high-end storage system based on the SC826BE1C- R920LP 2U rackmountable chassis and the X10DRH-iT dual processor serverboard.

Manual Organization Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. Chapter 1: Introduction FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ­ ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.

The first chapter provides a checklist of the main components included with the system and describes the main features of the X10DRH-iT serverboard and the SC826BE1C-R920LP chassis. Chapter 2: Server Installation This chapter describes the steps necessary to install the 6028R-E1CR12H into a rack and check out the server configuration prior to powering up the system. If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. California Best Management Practices Regulations for Perchlorate Materials:

This Perchlorate warn­ ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other repro­ ductive harm. Chapter 3: System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Manual Revision 1.0a Release Date: May 18, 2016 Chapter 4:

Standardized Safety Warnings Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the 6028R-E1CR12H. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2016 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America iii

Page 2

Appendix B System Specifications

S UPER S TORAGE S YSTEM 6028R-E1CR12H User's Manual Preface Notes Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X10DRH-iT serverboard, including the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when reconfig­ uring the serverboard. Chapter 6: Advanced Chassis Setup Refer to Chapter 6 for detailed information on the SC826BE1C-R920LP chassis. You should follow the procedures given in this chapter when installing, removing or reconfiguring SATA or peripheral drives and when replacing system power supply units and cooling fans. Chapter 7:

BIOS The BIOS chapter includes an introduction to BIOS and provides detailed informa­ tion on running the BIOS utility. Appendix A: BIOS Error Beep Codes Appendix B: System Specifications iv v

Page 3

Appendix B System Specifications

Table of Contents S UPER S TORAGE S YSTEM 6028R-E1CR12H User's Manual Table of Contents NIC1................................................................................................................. 3-3 NIC2................................................................................................................. 3-3 Chapter 1 Introduction HDD................................................................................................................. 3-3 1-1 Overview..........................................................................................................

1-1 1-2 Serverboard Features...................................................................................... 1-2 3-4 Drive Carrier LEDs.......................................................................................... 3-4 Power............................................................................................................... 3-3 Processors....................................................................................................... 1-2 Chapter 4 Standardized Warning Statements for AC Systems Memory............................................................................................................

1-2 Main Storage Controller................................................................................... 1-2 4-1 About Standardized Warning Statements........................................................ 4-1 Warning Definition............................................................................................ 4-1 Serial ATA......................................................................................................... 1-2 Installation Instructions.................................................................................... 4-4 PCI Expansion Slots........................................................................................

1-2 Rear I/O Ports.................................................................................................. 1-2 Circuit Breaker................................................................................................. 4-5 Power Disconnection Warning......................................................................... 4-6 Onboard Graphics........................................................................................... 1-3 Equipment Installation..................................................................................... 4-8 1-3 Server Chassis Features.................................................................................

1-3 System Power.................................................................................................. 1-3 Restricted Area................................................................................................ 4-9 Battery Handling............................................................................................ 4-10 Hard Drive Subsystem..................................................................................... 1-3 Redundant Power Supplies........................................................................... 4-12 Front Control Panel.........................................................................................

1-3 Cooling System................................................................................................ 1-3 Backplane Voltage......................................................................................... 4-13 Comply with Local and National Electrical Codes......................................... 4-14 1-4 Contacting Supermicro.................................................................................... 1-5 Product Disposal............................................................................................ 4-15 Hot Swap Fan Warning.................................................................................

4-16 Chapter 2 Server Installation 2-1 Overview.......................................................................................................... 2-1 Power Cable and AC Adapter ...................................................................... 4-18 2-2 Unpacking the System..................................................................................... 2-1 Chapter 5 Advanced Serverboard Setup 2-3 Preparing for Setup......................................................................................... 2-1 Choosing a Setup Location.............................................................................

2-1 5-1 Handling the Serverboard................................................................................ 5-1 Precautions...................................................................................................... 5-1 2-4 Warnings and Precautions............................................................................... 2-2 5-2 Connecting Cables.......................................................................................... 5-2 Rack Precautions............................................................................................. 2-2 Server Precautions..........................................................................................

2-2 Connecting Data Cables.................................................................................. 5-2 Connecting Power Cables............................................................................... 5-2 Rack Mounting Considerations........................................................................ 2-3 5-3 Rear I/O Ports.................................................................................................. 5-3 Connecting the Control Panel......................................................................... 5-2 2-5 Installing the System into a Rack....................................................................

2-4 Separating the Sections of the Rack Rails...................................................... 2-4 5-4 Installing the Processor and Heatsink............................................................. 5-4 Installing the Inner Rail Extension................................................................... 2-4 Installing an LGA2011 Processor.................................................................... 5-4 Installing a Passive CPU Heatsink.................................................................. 5-7 Chapter 3 System Interface Outer Rack Rails.............................................................................................

2-6 Removing the Heatsink................................................................................... 5-7 3-1 Overview.......................................................................................................... 3-1 5-5 Installing Memory............................................................................................. 5-8 Memory Support.............................................................................................. 5-8 3-2 Control Panel Buttons......................................................................................

3-1 Reset................................................................................................................ 3-1 DIMM Installation............................................................................................. 5-8 Power............................................................................................................... 3-1 5-6 Adding PCI Expansion Cards.........................................................................5-11 5-7 Serverboard Details....................................................................................... 5-12 3-3 Control Panel LEDs.........................................................................................

Page 4

Appendix B System Specifications

S UPER S TORAGE S YSTEM 6028R-E1CR12H User's Manual 5-9 Jumper Settings............................................................................................. 5-21 5-10 Onboard Indicators........................................................................................ 5-24 5-11 SATA Ports..................................................................................................... 5-25 5-12 Installing Software......................................................................................... 5-26 SuperDoctor® 5.............................................................................................

5-27 5-13 Onboard Battery............................................................................................ 5-28 Chapter 6 Advanced Chassis Setup 6-1 Static-Sensitive Devices.................................................................................. 6-1 Precautions...................................................................................................... 6-1 6-2 Control Panel................................................................................................... 6-2 6-3 Accessing the Inside of the Chassis...............................................................

6-2 6-4 System Fans.................................................................................................... 6-3 System Fan Failure......................................................................................... 6-3 Replacing System Fans................................................................................... 6-4 6-5 Air Shroud........................................................................................................ 6-5 6-6 Drive Bay Installation/Removal........................................................................ 6-6 Accessing the Drive Bays................................................................................

6-6 SAS/SATA Drive Installation............................................................................ 6-6 Hard Drive Backplane...................................................................................... 6-8 6-7 Power Supply................................................................................................... 6-9 Power Supply Failure...................................................................................... 6-9 Removing/Replacing the Power Supply..........................................................

6-9 6-8 Attaching a JBOD Expansion Chassis...........................................................6-11 Chapter 7 BIOS 7-1 Introduction...................................................................................................... 7-1 7-2 Main Setup....................................................................................................... 7-2 7-3 Advanced Setup Configurations......................................................................

7-4 7-4 Event Logs.....................................................................................................7-40 7-5 IPMI................................................................................................................ 7-42 7-6 Security Settings............................................................................................ 7-44 7-7 Boot Settings................................................................................................. 7-45 7-8 Save & Exit.................................................................................................... 7-46 Appendix A BIOS POST Error Codes Appendix B System Specifications viii

Page 5