Supermicro · 6048R-E1CR36N · 79 pp.

Supermicro Super Storage System 6048R-E1CR36N — User's Manual

Related manuals

Contents

Document text

Appendix B System Specifications

Preface The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Preface About This Manual Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software and docu­ mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the 6048R-E1CR36N. Installation and maintainance should be performed by experienced technicians only.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. The 6048R-E1CR36N is a high-end storage system based on the SC847BE1C- R1K28LPB 4U rackmount chassis and the X10DRi-T4+ dual processor serverboard.

Manual Organization Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. Chapter 1: Introduction FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ­ ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.

The first chapter provides a checklist of the main components included with the system and describes the main features of the X10DRi-T4+ serverboard and the SC847BE1C-R1K28LPB chassis. Chapter 2: Server Installation This chapter describes the steps necessary to install the 6048R-E1CR36N into a rack and check out the server configuration prior to powering up the system. If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. California Best Management Practices Regulations for Perchlorate Materials:

This Perchlorate warn­ ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other repro­ ductive harm. Chapter 3: System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Manual Revision 1.0a Release Date: April 27, 2016 Chapter 4:

Standardized Safety Warnings Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the 6048R-E1CR36N. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2016 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America iii

Page 2

Appendix B System Specifications

S UPER S TORAGE S YSTEM 6048R-E1CR36N User's Manual Preface Notes Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X10DRi-T4+ serverboard, includ­ ing the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when reconfig­ uring the serverboard. Chapter 6: Advanced Chassis Setup Refer to Chapter 6 for detailed information on the SC847BE1C-R1K28LPB chassis. You should follow the procedures given in this chapter when installing, removing or reconfiguring SATA or peripheral drives and when replacing system power supply units and cooling fans. Chapter 7:

BIOS The BIOS chapter includes an introduction to BIOS and provides detailed informa­ tion on running the CMOS Setup Utility. Appendix A: BIOS Error Beep Codes Appendix B: System Specifications iv v

Page 3

Appendix B System Specifications

Table of Contents S UPER S TORAGE S YSTEM 6048R-E1CR36N User's Manual Table of Contents Chapter 3 System Interface 3-1 Overview.......................................................................................................... 3-1 Chapter 1 Introduction 3-2 Control Panel Buttons...................................................................................... 3-1 1-1 Overview.......................................................................................................... 1-1 1-2 Serverboard Features......................................................................................

1-2 Reset................................................................................................................ 3-1 Power............................................................................................................... 3-1 Processors....................................................................................................... 1-2 3-3 Control Panel LEDs......................................................................................... 3-2 Memory............................................................................................................

1-2 Main Storage Controller................................................................................... 1-2 Power Fail........................................................................................................ 3-2 Overheat/Fan Fail............................................................................................ 3-2 Serial ATA......................................................................................................... 1-2 NIC1................................................................................................................. 3-2 PCI Expansion Slots........................................................................................

1-2 Rear I/O Ports.................................................................................................. 1-2 NIC2................................................................................................................. 3-3 HDD................................................................................................................. 3-3 1-3 Server Chassis Features................................................................................. 1-3 Power...............................................................................................................

3-3 System Power.................................................................................................. 1-3 Hard Drives...................................................................................................... 1-3 3-4 Drive Carrier LEDs.......................................................................................... 3-4 Chapter 4 Standardized Warning Statements for AC Systems Front Control Panel......................................................................................... 1-3 4-1 About Standardized Warning Statements........................................................

4-1 1-4 Contacting Supermicro.................................................................................... 1-5 Cooling System................................................................................................ 1-3 Warning Definition............................................................................................ 4-1 Installation Instructions.................................................................................... 4-4 Chapter 2 Server Installation Circuit Breaker.................................................................................................

4-5 2-1 Overview.......................................................................................................... 2-1 2-2 Unpacking the System..................................................................................... 2-1 Power Disconnection Warning......................................................................... 4-6 Equipment Installation..................................................................................... 4-8 2-3 Preparing for Setup......................................................................................... 2-1 Restricted Area................................................................................................

4-9 2-4 Warnings and Precautions............................................................................... 2-2 Choosing a Setup Location............................................................................. 2-1 Battery Handling............................................................................................ 4-10 Redundant Power Supplies........................................................................... 4-12 Rack Precautions............................................................................................. 2-2 Backplane Voltage.........................................................................................

4-13 Comply with Local and National Electrical Codes......................................... 4-14 Server Precautions.......................................................................................... 2-2 Rack Mounting Considerations........................................................................ 2-3 Product Disposal............................................................................................ 4-15 Ambient Operating Temperature................................................................. 2-3 Hot Swap Fan Warning.................................................................................

4-16 Power Cable and AC Adapter ...................................................................... 4-18 Reduced Airflow.......................................................................................... 2-3 Mechanical Loading.................................................................................... 2-3 Chapter 5 Advanced Serverboard Setup Circuit Overloading..................................................................................... 2-3 5-1 Handling the Serverboard................................................................................ 5-1 2-5 Rack Mounting Instructions.............................................................................

2-4 Reliable Ground.......................................................................................... 2-3 5-2 Connecting Cables.......................................................................................... 5-2 Precautions...................................................................................................... 5-1 Identifying the Sections of the Rack Rails....................................................... 2-4 Connecting Data Cables.................................................................................. 5-2 Connecting Power Cables...............................................................................

5-2 Installing the Inner Rails on the Chassis......................................................... 2-4 Locking Tabs.................................................................................................... 2-5 Connecting the Control Panel......................................................................... 5-2 Releasing the Inner Rail.................................................................................. 2-5 5-3 Rear I/O Ports.................................................................................................. 5-3 5-4 Installing the Processor and Heatsink.............................................................

Page 4

Appendix B System Specifications

S UPER S TORAGE S YSTEM 6048R-E1CR36N User's Manual Table of Contents 5-5 Installing Memory............................................................................................. 5-8 Removing the Heatsink................................................................................... 5-7 7-2 Main Setup....................................................................................................... 7-2 7-3 Advanced Setup Configurations...................................................................... 7-3 Memory Support..............................................................................................

5-8 7-3 Event Logs..................................................................................................... 7-23 5-6 Adding PCI Add-On Cards..............................................................................5-11 DIMM Installation............................................................................................. 5-8 7-4 IPMI............................................................................................................... 7-26 7-5 Boot...............................................................................................................

7-28 5-7 Serverboard Details....................................................................................... 5-12 7-6 Security.......................................................................................................... 7-29 X10DRi-T4+ Quick Reference....................................................................... 5-13 X10DRi-T4+ Quick Reference (cont.)............................................................ 5-14 Appendix A BIOS Error Beep Codes 7-7 Save & Exit....................................................................................................

7-30 5-8 Connector Definitions ................................................................................... 5-15 5-9 Jumper Settings............................................................................................. 5-22 Appendix B System Specifications 5-10 Onboard Indicators........................................................................................ 5-25 5-11 SAS/SATA Ports............................................................................................. 5-26 5-12 Installing Software.........................................................................................

5-27 SuperDoctor® 5............................................................................................. 5-28 5-13 Onboard Battery............................................................................................ 5-29 Chapter 6 Advanced Chassis Setup 6-1 Static-Sensitive Devices.................................................................................. 6-1 Precautions...................................................................................................... 6-1 Unpacking........................................................................................................

6-1 6-2 Control Panel................................................................................................... 6-2 6-3 Removing the Chassis Cover.......................................................................... 6-3 6-4 System Fans.................................................................................................... 6-4 System Fan Failure......................................................................................... 6-4 6-5 Drive Bay Installation/Removal........................................................................ 6-5 Replacing System Fans...................................................................................

6-4 Accessing the Drive Bays................................................................................ 6-5 Hard Drive Installation..................................................................................... 6-6 Hard Drive Backplane................................................................................. 6-7 Removing the Air Shroud................................................................................ 6-8 6-6 Installing Optional Fixed Hard Drives ............................................................. 6-9 6-7 Power Supply.................................................................................................

6-10 Power Supply Failure.................................................................................... 6-10 6-8 Attaching a JBOD Expansion Chassis...........................................................6-11 DC Power.......................................................................................................6-11 Chapter 7 BIOS 7-1 Introduction...................................................................................................... 7-1 Starting BIOS Setup Utility.............................................................................. 7-1 How To Change the Configuration Data..........................................................

7-1 Starting the Setup Utility.................................................................................. 7-2 viii iv

Page 5